Contact us
Call us at
Available 6:00 AM – 5:00 PM (PST) Business Days
Download
Download Manuals, Datasheets, Software and more:
Feedback
EA-BT 20000 Series
Optimized for battery testing and battery simulation, the EA-BT 20000 Series are fully bidirectional supplies, allowing full control for both discharging and charging battery cells, packs, or modules. A max power of 30kW and the ability to parallel channels for up to 1800 A allows you to scale a solution to meet your needs. Included regenerative technology recovers energy during battery discharge or while simulating a charging battery and feeds that energy back into the local grid that would otherwise be lost as heat, reducing operating expenses and HVAC costs.
Up to 30 kW
Up to 2000 V
Up to 1000 A
For all your battery needs
Battery Testing
Run a benchtop test or configure an automated system for production testing of batteries as cells, modules, or packs. Determine SOH (State-of-Health), second life classification, and perform EOL (End-of-Line) testing. An efficiency of up to 96% means you lose less energy when performing repeated battery cycling, feeding sunk energy back into the local grid.
Battery Simulation
Simulate battery cells, modules, or even full packs when designing or testing systems that work with batteries to get repeatable results that aren’t dependent on one-off battery errors. Overcurrent protection (OCP) prevents damage to sensitive components and voltage and current datalogging allow a better picture of how your design is working.
Battery Recycling
Recover energy from batteries at their end of life before being sent to recycling. Autoranging capability allows the maximum possible discharge current down to 2 V while the regenerative capability feeds recovered energy back into the grid with 96% efficiency.
3 Channels multiply your throughput
The EA-BT 20000 Triple battery tester brings 3 10kW channels to a single 4U instrument. Each channel can be controlled individually to maximize test throughput, or paralleled together for higher current when test needs require.High precision and high speed
Every EA-BT 20000 Series includes external sense to measure voltage directly at the battery. This gives you greater precision in your measurements and reduces errors caused by voltage drop through test leads, most important when using high current.Three channel models and 1 ms communication speed accelerate your testing on the bench and in automated systems. Active pre-charge, cable and connection checks, and cable overload protections further speed your testing and prevents downtime.
Series | Power | Voltage | Current | Quote |
---|---|---|---|---|
EA-BT 20000 Triple 4U | 4kW per channel to 10kW per channel | 0 to 920V | 40A per channel to 600A per channel | Get a Quote |
EA-BT 20000 4U | 30kW | 0 to 2000V | 0 to 1000A | Get a Quote |
EA-BT 20000 3U | 0-15kW | 0 to 2000V | 0 to 600A | Get a Quote |
Series | Power | Voltage | Current | Quote |
---|---|---|---|---|
EA-BT 20000 Triple 4U | 4kW per channel to 10kW per channel | 0 to 920V | 40A per channel to 600A per channel | Get a Quote |
EA-BT 20000 4U | 30kW | 0 to 2000V | 0 to 1000A | Get a Quote |
EA-BT 20000 3U | 0-15kW | 0 to 2000V | 0 to 600A | Get a Quote |